Electrical

Rating
Read Reviews (0) Write A Review

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

Product Code: PRT200


$214.50 inc GST
Quantity In Cart:  
0 in Stock

Available now for Backorder

Estimated Leadtime: 4 weeks
Products to compare:
Comparing Products

Description

The PRT200 is a non-contact phase sequence tester that tests up to 1000 VAC with visual/audible indication. The tester has a 45 to 65Hz frequency range, features adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight, low battery warning and fully insulated alligator clips with wide jaws. The product has a CAT IV 600 Volt safety rating and is complete with a year warranty.

Features

  • 75 to 1000VAC input voltage with 45 to 65Hz frequency range
  • LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
  • Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
  • Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
  • Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
  • Fully insulated alligator clips with wide jaws
  • Low battery warning
  • CAT IV-600V safety rating
  • Dimensions: 4.7 x 2.7 x 1.5" (118 x 69 x 38mm); Weight: 13oz (370g)
  • Complete with three built-in 30" test leads with large color-coded alligator clips, four AA batteries, and pouch case

Technical Specifications

Auto-Off
5 min. without sequence detection
Batteries
4 x 1.5V AA
Current consumption
15mA
Frequency Range
45 to 65Hz
Input Voltage
75 to 1000VAC
Low Battery Warning
Power LED flashes
Max conductor diameter
33mm (1.3")
Measurement Principle
Static induction
Operating Temperature & Humidity
-10°C to 50°C (14°F to 122°F) Max. 80% R.H.
Probe length
1.5m (59")
Storage Temperature & Humidity
-20°C to 60° (-4°F to 140°F) Max. 80% R.H.

Documents and Downloads

Installing any type of electricity supply whether it would be single or three phase, would need a professional input and cannot be executed other than by authorized personnel. When three phase electrical connections are installed it is important to ensure that the three phases which supply the electricity along with the neutral line are installed correctly. Any faulty installation would damage equipment and cause untold financial disasters which could run into millions of dollars.

Ensure that your three phase electrical supply is installed correctly

The right phase rotation or phase sequence should be maintained during the installation process, if not appliances or machinery connected could operate in the opposite direction and cause tremendous financial loss or even cause human fatalities. Dabbling with electricity is not a joke or child’s play it is important that nothing is left to chance but the installation is executed flawlessly. There is no room for error hence personnel with a high proficiency in three phase installation should undertake the execution of the work.

During and after the installation process the phase rotation meter should be used to ensure the connections are flawless because there is no room for any error to occur. The final connection from the supply line should be as perfect as it should be with the phase rotation meter authenticating the fact.

The phase rotation meter is a very simple hand held contraption which would give the right phase sequence or phase rotation reading to inform you instantly that all is well. Most professionals would ensure that when installing three phase supply to a distribution board that the connection is perfect in every aspect. The phase rotation meter is their “Man Friday” which would give them a very quick reading that they have got it right.

We have come to a very remarkable cross road as far as using and employing electricity is concerned. We have taken it for granted and when switching on an electrical bulb or appliance we do not for a moment consider the importance of its discovery or the generation of it at tremendous cost. We need to conserve electricity for our future generations and be very conscious of the fact about its inherent dangers as well. It is also imperative that we keep a strict check on our electrical supply lines by putting it under test by employing a phase rotation meter.

Customer Reviews
There are currently no reviews for this product, be the first.
Thank you for your review of EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER.
Write A Review

Frequently Asked Question

Yes, in most cases we can price match for the same item, subject to approval. Please contact our office to request a price match via sending us an email at customerservice@ipd.com.au or ring us at 1300 556 601. We pride ourselves in the service we provide and being able to support our customers locally, hence why you might see a different price on our website.

Our website shows up to date stock on hand quantity for each product. Click on a product and check the stock on hand under the pricing information.

If an item is not in stock our website shows the estimated lead time for that product from the date that you order it. Order the item as per normal and your order will go on backorder and once, we have the item in stock, it will be shipped out to you.

Our website is being continuously updated with items daily. If you cannot find a particular item on our website, please contact us for pricing at customerservice@ipd.com.au .

Yes, we do offer education discount for our education customers, please contact our CS team for further information via customerservice@ipd.com.au .

Yes, we do offer special project pricing and bulk pricing. Please send us an email at customerservice@ipd.com.au to inquire further.

No, you do not need an account. At checkout you can select guest checkout for a quick and easy method to pay. Alternatively, you can set up an account as well to have access to invoices and past orders.

If you get an error message at checkout, please double check your payment information and re try. If problem still occurs, please contact us at 1300 556 601 or send us an email with a screenshot at customerservice@ipd.com.au

Please send us an email at customerservice@ipd.com.au , or use the online chat enquiry or ring us at 1300 556 601 to have all your questions answered.

For change of minds return, you can request a refund within 30 days of purchase. Please ensure you keep all original packaging and goods will be subject to inspection. For faulty items, we will either repair the instrument or send you a replacement, subject to fault.

Freight is free for all orders above $150. For all metro regions within Australia freight time is 1-3 days. For regional areas transit time is 3-5 days. If you require express delivery, please contact us at customerservice@ipd.com.au .

No, we only ship within Australia.

The best way to see our range of products is by clicking the brands tab or just Click Here .

Warranty depends on the item that you are interested in for example all Siglent items come with standard 3yrs warranty and most FLIR items come with 2-10 Yr. warranty. Please contact us via live chat support or sending an email to customerservice@ipd.com.au to confirm warranty.

Yes, we have a reviews page which can be accessed by clicking the Reviews tab at the top of the website, or just Click Here.

Yes, we have Demo items available for most items. If you require a Demo unit, please contact us at customerservice@ipd.com.au .

Yes, we always have various promos running on the site. Please click on the promotions tab or just Click Here .

Yes, we have items on sale, access them by clicking on Special offers or just Click Here .

Yes, we have clearance items, access them by clicking on clearance tab or just Click Here.

Yes, if you require tracking for you order, please email us your order number at customerservice@ipd.com.au and we will email you a tracking number once your item has been dispatched.

Our site accepts PayPal, Master card and VISA. If you wish to purchase via bank transfer or any other means, please contact us at customerservice@ipd.com.au .

We have offices all around Sydney and our head office is in Sydney Wetherill Park. For our locations, please Click Here.

Pick up in only available from our Sydney Wetherill Park head office, please select pick up at checkout if you wish to collect the goods. For all other states if pick up is required, please contact us at customerservice@ipd.com.au .

Yes, we have NATA certified lab for calibration and repair for most instruments. To discuss our calibration services please send us an email at services@ipd.com.au or ring us at 1300 556 601 and ask for calibration.

Products to compare:
Comparing Products