Electronic & RF

Rating
Read Reviews (0) Write A Review

SIGLENT SDS1104X-U DIGITAL OSCILLOSCOPE, 100MHz 4 CHANNEL 1GS/S WITH SERIAL DECODE

Product Code: SDS1104X-U


$632.50 inc GST
Quantity In Cart:  
0 in Stock

Available now for Backorder

Estimated Leadtime: 2 weeks
Products to compare:
Comparing Products

Description

SIGLENT’s SDS1000X-U Series Super Phosphor Oscilloscopes is available in one bandwidth, 100 MHz. It has a maximum sample rate of 1 GSa/s and a maximum record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. The SDS1000X-U series employs a new generation of SPO (Super -Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. It comes with an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X-U also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s latest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering. Serial bus decoding for IIC, SPI, UART, CAN, and LIN bus types are included. The X-U models also include History waveform recording and sequential triggering that enable extended waveform recording and analysis. Another powerful addition is the new 128k point FFT math function that gives the SDS1000X-U very high frequency resolution when observing signal spectra. The new digital design includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response. SDS1000X-U also supports searching and navigating. The features and performance of SIGLENT’s new SDS1000X-U cannot be matched anywhere else in this price class

Features

  • 100MHz bandwidth
  • Real time sampling rate up to 1 GSa/s
  • The newest generation of SPO technology
  • Waveform capture rates up to 1 0 0,000 wfm/s (normal mode) and 4 00,000 wfm/s (sequence mode)
  • Supports 256 level intensity grading and color temperature display modes
  • Record length up to 14 Mpts
  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
  • Serial bus triggering and decodin g (Standard), supports protocols IIC, SPI, UART, CAN, LIN
  • Video trigger, supports HDTV
  • 10 types of one button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
  • Segmented acquisition (Sequ ence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
  • History waveform record (History) function (maximum re corded waveform length is 80,000 frames)
  • Large 7 inch TFT LCD display with 800 * 480 resolution
  • Multiple interface types: USB Host, USB Device (USB TMC), LAN, Pass / Fail, Trigger Out
  • Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
  • 128k pts FFT, supports Peaks and Markers
  • Math and measurement functions use all sampled data points (up to 14 Mpts)
  • Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
  • High Speed hardware based Pass/ Fail function
  • VXI 11+SCPI, Telnet (Port 5024) +SCPI and Socket (Port 5025) +SCPI programming over LAN
  • Supports Multi language display and embedded online

Technical Specifications

Bandwidth
100 MHz
Channels
4
Display
7-inch TFT-LCD (800x480)
I/O
USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Memory depth (Max.)
14 Mpts
Probe (Std)
4 pcs passive probe PP510
Sample rate (Max.)
1 GSa/s (One channel), 500 MSa/s(Two channels), 250 MSa/s(Four channels)
Serial Trigger and decoder (std)
IIC, SPI, UART, CAN, LIN
Trigger type
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Waveform capture rate (Max.)
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Weight
Without package 2.6 kg; With package 3.8 kg

Documents and Downloads

Customer Reviews
There are currently no reviews for this product, be the first.
Thank you for your review of SIGLENT SDS1104X-U DIGITAL OSCILLOSCOPE, 100MHz 4 CHANNEL 1GS/S WITH SERIAL DECODE.
Write A Review

Frequently Asked Question

Yes, in most cases we can price match for the same item, subject to approval. Please contact our office to request a price match via sending us an email at customerservice@ipd.com.au or ring us at 1300 556 601. We pride ourselves in the service we provide and being able to support our customers locally, hence why you might see a different price on our website.

Our website shows up to date stock on hand quantity for each product. Click on a product and check the stock on hand under the pricing information.

If an item is not in stock our website shows the estimated lead time for that product from the date that you order it. Order the item as per normal and your order will go on backorder and once, we have the item in stock, it will be shipped out to you.

Our website is being continuously updated with items daily. If you cannot find a particular item on our website, please contact us for pricing at customerservice@ipd.com.au .

Yes, we do offer education discount for our education customers, please contact our CS team for further information via customerservice@ipd.com.au .

Yes, we do offer special project pricing and bulk pricing. Please send us an email at customerservice@ipd.com.au to inquire further.

No, you do not need an account. At checkout you can select guest checkout for a quick and easy method to pay. Alternatively, you can set up an account as well to have access to invoices and past orders.

If you get an error message at checkout, please double check your payment information and re try. If problem still occurs, please contact us at 1300 556 601 or send us an email with a screenshot at customerservice@ipd.com.au

Please send us an email at customerservice@ipd.com.au , or use the online chat enquiry or ring us at 1300 556 601 to have all your questions answered.

For change of minds return, you can request a refund within 30 days of purchase. Please ensure you keep all original packaging and goods will be subject to inspection. For faulty items, we will either repair the instrument or send you a replacement, subject to fault.

Freight is free for all orders above $150. For all metro regions within Australia freight time is 1-3 days. For regional areas transit time is 3-5 days. If you require express delivery, please contact us at customerservice@ipd.com.au .

No, we only ship within Australia.

The best way to see our range of products is by clicking the brands tab or just Click Here .

Warranty depends on the item that you are interested in for example all Siglent items come with standard 3yrs warranty and most FLIR items come with 2-10 Yr. warranty. Please contact us via live chat support or sending an email to customerservice@ipd.com.au to confirm warranty.

Yes, we have a reviews page which can be accessed by clicking the Reviews tab at the top of the website, or just Click Here.

Yes, we have Demo items available for most items. If you require a Demo unit, please contact us at customerservice@ipd.com.au .

Yes, we always have various promos running on the site. Please click on the promotions tab or just Click Here .

Yes, we have items on sale, access them by clicking on Special offers or just Click Here .

Yes, we have clearance items, access them by clicking on clearance tab or just Click Here.

Yes, if you require tracking for you order, please email us your order number at customerservice@ipd.com.au and we will email you a tracking number once your item has been dispatched.

Our site accepts PayPal, Master card and VISA. If you wish to purchase via bank transfer or any other means, please contact us at customerservice@ipd.com.au .

We have offices all around Sydney and our head office is in Sydney Wetherill Park. For our locations, please Click Here.

Pick up in only available from our Sydney Wetherill Park head office, please select pick up at checkout if you wish to collect the goods. For all other states if pick up is required, please contact us at customerservice@ipd.com.au .

Yes, we have NATA certified lab for calibration and repair for most instruments. To discuss our calibration services please send us an email at services@ipd.com.au or ring us at 1300 556 601 and ask for calibration.

Products to compare:
Comparing Products