1300 550 187
Email Us
1300 556 601
$0.00 (0 items)
You currently have 0 items products in your cart
Subtotal (inc GST)
Charges
Discounts
-
Freight
No Charge
Requires Quote
Total (inc GST)
Including GST
Discounts (inc GST)
-
Giftcard Total
Net Owing
Checkout
$0.00 (0 items)
You currently have 0 items products in your cart
Subtotal (inc GST)
Charges
Discounts
-
Freight
No Charge
Requires Quote
Total (inc GST)
Including GST
Discounts (inc GST)
-
Giftcard Total
Net Owing
Checkout

Electronic & RF

Rating
Read Reviews (0) Write A Review

SIGLENT SDS1202X DIGITAL OSCIL LOSCOPE 200 MHZ SDS1202X

Product Code: SDS1202X


$1196.80 inc GST
Increase value Decrease value
Quantity In Cart:  
0 in Stock
Products to compare:
Comparing Products

Description

SIGLENT’s new SDS1202X Series Super Phosphor dual Channel 100 MHz Oscilloscope with a sampling rate of 1 GSa/s and a standard record length of 14 Mpts. The most commonly used functions can be accessed with its user-friendly one-button design. The Siglent SDS1202X employs a new generation of SPO technology. With its excellent signal fidelity, background noise is lower than similar products in the industry. It has a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 60,000 frames/sec. It also employs not only the common 256-level intensity grading display function but also a color temperature display mode not found in other models in this class. Siglent’s new oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering and decoding. History waveform recording and sequential triggering allow for extended waveform records to be captured, stored, and analyzed. The features and high-performance of the SDS1202X oscilloscope cannot be matched at any product at this price.

Features

  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout (Dropout), and Pattern
  • Serial bus triggering and decode, supports protocols IIC, SPI, UART, RS232, CAN, and LIN
  • Video triggers and supports HDTV
  • Low background noise with 500 µV/div to 10 V/div voltage scales
  • 10 types of one-button shortcuts: Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, minimizes trigger dead time.
  • History waveform recording function stores up-to 80,000 frames
  • Automatic measurement function on 37 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
  • Math function (FFT, addition, subtraction, multiplication, division, integration, differential, and square root)
  • High Speed hardware based Pass/ Fail function
  • 16 Digital channels (MSO), Maximum waveform capture rate up to 500 MSa/s, Record length up to 14 Mpts/CH (Option for SDS1000X+ models)
  • 25 MHz DDS arbitrary waveform generator, built-in 10 kinds of waveforms (Standard for SDS1000X+ models)
  • Large 8-inch TFT-LCD display with 800 * 480 resolution
  • Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
  • Supports SCPI remote control commands
  • Multi-language display and embedded help

Technical Specifications

16 Digital Channels (MSO Option)
Maximum waveform capture rate up to 500 MSa/s, Record length up to 14 Mpts/CH SDS1000Xplus Supported (Optional); SDS1000X Not supported
Bandwidth
200 MHz
Channels
2 EXT
DDS Waveform Generator
Single Channel, Max. Frequency up to 25 MHz, 125 MSa/s sampling rate, 16 Kpts wave length SDS1000Xplus Supported (Standard); SDS1000X Not supported
Decode Type (Optional)
I 2 C, SPI, UART/RS232, CAN, LIN
Display
8 inch TFT-LCD (800x480)
I/O
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, 1 KHz Cal
Logic Probe
SPL1016 (Optional)
Memory Depth (Max.)
7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)
Probe (Std)
2 pcs passive probe PP215
Sampling Rate (Max.)
1 GSa/s
Serial Trigger
I 2 C, SPI, UART/RS232, CAN, LIN
Trigger Type
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video
Waveform Capture Rate (Max.)
60,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Weight
Without package 3.26 Kg; with package 4.25 Kg

Documents and Downloads

Datasheet

Accessories

SIGLENT SPL1016 LOGIC PROBE FOR SD1000X SERIES
SIGLENT SPL1016 LOGIC PROBE FOR SD1000X SERIES

$425.70 inc GST
Increase value Decrease value
Customer Reviews
There are currently no reviews for this product, be the first.
Thank you for your review of SIGLENT SDS1202X DIGITAL OSCIL LOSCOPE 200 MHZ SDS1202X.
Write A Review

Frequently Asked Question

Yes, in most cases we can price match for the same item, subject to approval. Please contact our office to request a price match via sending us an email at customerservice@ipd.com.au or ring us at 1300 556 601. We pride ourselves in the service we provide and being able to support our customers locally, hence why you might see a different price on our website.

Our website shows up to date stock on hand quantity for each product. Click on a product and check the stock on hand under the pricing information.

If an item is not in stock our website shows the estimated lead time for that product from the date that you order it. Order the item as per normal and your order will go on backorder and once, we have the item in stock, it will be shipped out to you.

Our website is being continuously updated with items daily. If you cannot find a particular item on our website, please contact us for pricing at customerservice@ipd.com.au .

Yes, we do offer education discount for our education customers, please contact our CS team for further information via customerservice@ipd.com.au .

Yes, we do offer special project pricing and bulk pricing. Please send us an email at customerservice@ipd.com.au to inquire further.

No, you do not need an account. At checkout you can select guest checkout for a quick and easy method to pay. Alternatively, you can set up an account as well to have access to invoices and past orders.

If you get an error message at checkout, please double check your payment information and re try. If problem still occurs, please contact us at 1300 556 601 or send us an email with a screenshot at customerservice@ipd.com.au

Please send us an email at customerservice@ipd.com.au , or use the online chat enquiry or ring us at 1300 556 601 to have all your questions answered.

For change of minds return, you can request a refund within 30 days of purchase. Please ensure you keep all original packaging and goods will be subject to inspection. For faulty items, we will either repair the instrument or send you a replacement, subject to fault.

Freight is free for all orders above $150. For all metro regions within Australia freight time is 1-3 days. For regional areas transit time is 3-5 days. If you require express delivery, please contact us at customerservice@ipd.com.au .

No, we only ship within Australia.

The best way to see our range of products is by clicking the brands tab or just Click Here .

Warranty depends on the item that you are interested in for example all Siglent items come with standard 3yrs warranty and most FLIR items come with 2-10 Yr. warranty. Please contact us via live chat support or sending an email to customerservice@ipd.com.au to confirm warranty.

Yes, we have a reviews page which can be accessed by clicking the Reviews tab at the top of the website, or just Click Here.

Yes, we have Demo items available for most items. If you require a Demo unit, please contact us at customerservice@ipd.com.au .

Yes, we always have various promos running on the site. Please click on the promotions tab or just Click Here .

Yes, we have items on sale, access them by clicking on Special offers or just Click Here .

Yes, we have clearance items, access them by clicking on clearance tab or just Click Here.

Yes, if you require tracking for you order, please email us your order number at customerservice@ipd.com.au and we will email you a tracking number once your item has been dispatched.

Our site accepts PayPal, Master card and VISA. If you wish to purchase via bank transfer or any other means, please contact us at customerservice@ipd.com.au .

We have offices all around Sydney and our head office is in Sydney Wetherill Park. For our locations, please Click Here.

Pick up in only available from our Sydney Wetherill Park head office, please select pick up at checkout if you wish to collect the goods. For all other states if pick up is required, please contact us at customerservice@ipd.com.au .

Yes, we have NATA certified lab for calibration and repair for most instruments. To discuss our calibration services please send us an email at services@ipd.com.au or ring us at 1300 556 601 and ask for calibration.

Products to compare:
Comparing Products