The FLIR C3 is a full-featured,...
Test and Measurement focuses on dedicated equipment for analysis, validation, and verification of electronic device measurement, mechanical systems, and end products. As complexity of measurement tasks increases, providers are required to develop innovative products with higher accuracy and resolution and flexible system expandability to keep up with technological progress.
Common Test and Measurement Applications:
Aerospace and Defense
Radar and Broadband Signal Capture
Research and Development
Benchtop instruments are conventionally employed in the test and measurement industry. Modular instrumentation (PXI platform, Digitizers/Oscilloscope), as an open architecture can, however, provide enormous benefits of compact footprint, high density, high throughput, and flexibility, enabling configuration of design verification systems based on different testing requirements. For long-term investment, the PXI platform simplifies upgrades and conserves long-term cost of ownership, easily satisfying challenges in the field.
High System Throughput
The PXI PC-based solution provides advantages of the latest high performance processors, reducing post-processing time. The PXIe backplane bus utilizes the PC industry's PCI Express® Gen2 technology, greatly increasing throughput and reducing latency. This technology helps transfer data between modules and controller at higher speeds, reducing test time especially for data and transaction intensive test applications.
Flexibility and Scalability
PXI is an open standard defined by the PXI Systems Alliance, ensuring that modules from different vendors can be used together. In addition, by integrating the bus into the backplane of the chassis, it is possible to continuously scale systems, with PXI trigger & synchronization function, enabling simultaneous precision multi-channel sampling.
Aside from taking advantage of Moore's Law of integration and miniaturization, removal of redundant functions in an integrated system takes precedence. PXI removes redundancy and can save up to 80% of the space of traditional systems, expanding flexibility of function and minimizing upgrade complexity and cost.
The PCI/PXI-9527 is a high-performance, 2-CH analog input and 2-CH analog output dynamic signal acquisition module. This module is specifically designed for audio testing, acoustic measurement, and vibration analysis applications.
512MB on-board memory for data storage, Software selectable 50Ω or 1 MΩ input impedance, Programmable input voltage range: ±1 V, ±0.2 V and ±5V, ±1V, Multiple module synchronization via SSI
ADLINK PCIe-7300A is an ultra-high-speed digital I/O card. It consists of 32 digital input/output channels. Multiple I/O port configurations: 16-CH DI & 16-CH DO, 32-CH DI or 32-CH DO
192 kS/s maximum sampling rate, ±1V, and 10V input ranges, 110 dB dynamic range, Antialiasing filters, AC (0.5Hz), or DC coupling, software selectable, IEPE - 4mA, software configurable
The ADLINK PCIe-9814 is a PCI Express digitizer providing speedy, high quality data acquisition. Each of the four input channels supports up to 80MS/s sampling, with 12-bit resolution A/D converter.
The ADLINK PCIe-9852 is a 2-CH 14-bit 200 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 90 MHz.
ADLINK SB-2405 24-bit USB DAQ plus GM Lite software plus 603C01 Accelerometer plus Cable plus Magnetic Mount
The USB-1210 is a 16-bit high-speed USB 2.0-based DAQ module equipped with 4 analog input channels providing simultaneous sampling at up to 2MS/s per channel.
16 SE / 8 Pseudo-differential voltage inputs, High impedance > 1 GΩ, No Analog Output
16 SE / 8 Pseudo-differential voltage inputs, High impedance > 1 GΩ, 2 x Analog Voltage Outputs
8 Current inputs, 249.5 Ω (input resistor) Input Impedance, 2 x Analog Voltage Outputs
4-CH simultaneous-sampling analog input, Built-in signal conditioning for high voltage/current/thermocouple/RTD/strain gauge/load cell measurement, Up to 2kS/s analog input rate