The STC CLOAK has been designed to comply with Australian Standards AS/NZS 61010.1 to maximize user safety. Facilitates Class ll Insulation Resistance and leakage current testing according to the requirements of AS/NZS37060:2010.
Material Pure silver coated on nylon Resistance over length nominal 0.780 ohms.
Dimensions (LxW) 1450 x 145mm.
Electrical Safety IEC61010-1:200
Operating temperature range 0 - 40°C
Washable Hand wash between 30 -90°C
Colour Light grey
Robustness medium, can be torn
Requirement must be kept clean, fit for purpose
Out of Box warranty material has no flaws and stitching is sound
Must be considered an electrical appliance Class l which will degrade in performance with use, therefore must be tested periodically for a resistance not exceeding 1 ohm.
Application: To be tightly wrapped around a Class ll electrical appliance including all metal parts and appliance lead and then connect to the tester’s cloak & earth return socket via the earth probe lead. Do not connect to possible rotating parts if applying a run leakage current test.