Keysight U1281A Handheld Digital Multimeter, 5 Digit

U1281A

New product

60,000 count, IP67 dust and water protected, data logging, DCV accuracy of 0.025%, 800 hour battery life.

More details

$645.00 tax excl.

-$83.00

$728.00 tax excl.

More info

Gain the confidence to achieve trustworthy measurements thanks to the precision, accuracy and repeatability of the Keysight Technologies, Inc. U1280 series handheld digital multimeters (DMMs). Why feel tied to the bench when it comes to the need of troubleshooting electronic circuits in the system? Now you can get accurate and reliable measurement with 60,000-count display resolution and 0.025% basic DCV accuracy for troubleshooting electronic circuits of the system.

 

Key Features

  • 60,000-count dual display
  • Up to 0.025% basic DCV accuracy
  • Longer battery life up to 800 hours
  • Certified to IP 67 for water and dust protection
  • Tested to withstand a 3-meter (10-ft) drop
  • CAT III 1000 V / CAT IV 600 V overvoltage protection

U1282A Special Features (U1282A Meter Only)

  • Vsense for non-contact voltage detection
  • Square wave output for generating pulse width modulation (PWM) signal
  • Frequency counter
  • Low pass filter
  • For Keysight Remote Link solution, add on optional U1117A Infrared (IR)-to-Bluetooth® adapter to get instant wireless Bluetooth connection

 

 

Keysight U1281A

Keysight U1281A Rear

 

 

Comprehensive data logging experience with Keysight Meter Logger software

 

When it comes to the need to observe measurements over a period of time, Keysight Meter Logger software provides a comprehensive data logging experience with Keysight U1280 Series as well as other Keysight U1200 Series handheld DMMs. The handheld DMM can be easily connected to the Meter Logger software that runs on a PC via Infrared (IR)-to-USB cable, or to do so wirelessly with the optional Keysight Remote Link solution.

 

Data Logging

 

Built-in low pass filter
Today, three-phase AC electric motors are the most important workhorses in industry and commercial facilities. With the advent of solid state electronics, variable speed drives (VFD) are used to regulate the speed of three-phase AC motors to increase the efficiency of AC motors. However, the increased use of VFDs present challenges to technicians in getting accurate voltage, current and frequency measurements that match with readings shown on the VFD’s control panel display.

 

Many true RMS DMMs that have high AC bandwidth are measuring VFD signals up to 20% to 30% higher than the drive’s controller display due to the reason that DMMs are measuring the carrier  frequency/switching frequency generated by VFDs. Keysight U1280 Series comes with LPF (low pass filter) feature which blocks unwanted high frequency signal from VFDs’ switching components. The net result is an accurate measurement of VFD’s output signal which helps to expedite the maintenance or troubleshooting tasks of VFDs.

 

Standard shipped accessories
4 ½-digit handheld digital multimeter, test leads (red and black), infrared (IR)-to-USB cable, AA batteries (4x), Quick Start Guide, Certificate of Calibration

 

Specifications

Accessories

Download