ADLINK Rotary Machine Condition Monitoring Starter Kit

Rotary Machine Condition Monitoring Starter Kit, an all-in-one package providing a cost-effective solution for 24/7 online monitoring and failure prediction.

• Easily set up, ready-to-go starter kit for rotary machines
• USB-2405 24-bit 4-CH USB DAQ: *USB bus power requires no additional power supply. *Built-in IEPE 2mA excitation current eliminates the need for supplementary signal conditioning devices to drive the accelerometer
• Phoenix GM Lite machine condition monitoring application: *4CH simultaneous sampling at pre-defined intervals (min. 60 seconds) *Automatic OA (overall) calculation of displacement, velocity, and acceleration *Real-time display of acceleration waveform and FFT
• Threshold settings for conditions user-defined or by default with ISO 10816 machinery vibration standards
• Quick attachment of accelerometer to the rotary device with integral magnetic mount means no adapter or additional fastening is required

ADLINK USB-2405 4-CH 24-Bit DSA Module is intuitive and easy to use for microphone and accelerometer measurement in vibration and acoustic applications with compelling features including built-in IEPE 2mA excitation current source on each channel without additional signal conditioning, and anti-aliasing filters enable cutoff frequency to be automatically adjusted to the sampling rate, suppressing out-of-band noise. In addition, the USB-2405's USB bus power makes it perfect for portable field measurement when used with laptop.



Efficient, Easy, Machine Condition Monitoring Application Phoenix GM Lite Software monitors and analyzes rotating machinery, calculating different overall (OA) bandwidths and condition data and generating alerts when predefined alarm and condition parameters are exceeded. Threshold settings can be user-defined or by default with ISO 10816 machinery vibration standards.




Starter Kit Contains:

• USB-2405 (24-bit 4-CH USB DSA)
• Phoenix GM Lite machine condition monitoringutility license (Microsoft® Windows based)
• Accelerometer (PCB 603C01)
• 10 ft cable for accelerometer
• Mounting magnet

Specific Details for the ADLINK USB-2405 DAQ

The USB-2405 is a 24-bit high-performance dynamic signal acquisition USB module equipped with 4 analog input channels providing simultaneous sampling at up to 128 kS/s per channel. The USB-2405 also features software-selectable AC or DC coupling input configuration and built-in high precision 2 mA excitation current to measure integrated electronic piezoelectric (IEPE) sensors such as accelerometers and microphones.

The USB-2405 delivers high precision, DC and dynamic measurement performance with very low temperature drift. The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering, suppressing modulator and signal out-of-band noise and providing usable signal bandwidth of the Nyquist rate, making it ideal for high dynamic range signal measurement in vibration and acoustic applications.

The USB-2405 supports digital and analog trigger sources and flexible trigger modes, including post, delay, middle, gated, and pre-triggering for efficient data acquisition with no need for post-processing. The USB-2405 is USB bus-powered and equipped with BNC connectors and removable spring terminals for easy device connectivity.

:
Applications

• Vibration testing
• Machine condition monitoring
• Acoustic measurement
• Environmental noise analysis

  Features

• Hi-Speed USB 2.0, and USB bus powered
• 24-bit Sigma-Delta ADC with built-in anti-aliasing filter
• 4-CH simultaneous sampling analog input, up to 128kS/s
• AC or DC input coupling, software selectable
• Analog or digital triggering
• Supports 2mA excitation output on each analog input channel for IEPE sensor measurement
• Full auto-calibration
• Supporting Time-Frequency analysis software -Visual Signal

The installation USB flash drive for Visual Signal DAQ Express is included with the shipment-ready ADLINK USB-2405 at no extra cost. Users need only follow the instructions on the Quick Start Guide to register on the website and activate their Visual Signal DAQ Express.

AC Dynamic Performance (typical, 25°C) - THD, THD+N (Vin = 8.9 Vpk)

Why ADLINK USB-2405?

The ADLINK USB-2405 is a dynamic signal acquisition module featuring high accuracy and excellent dynamic performance, directly acquiring signals from the IEPE accelerometers and microphones commonly used in vibration and acoustic applications without extra signal conditioning. The included time-frequency analysis software, Visual Signal DAQ Express, simplifies acquisition and analysis of noise and vibration signals for instant results, in an easy-to-use application with interactive user interface.

Combining high accuracy, excellent performance, and powerful analysis application Visual Signal DAQ Express, the USB-2405 is the best choice for a portable time-frequency spectrum analyzer for machine diagnostics and failure prevention, research, and portable field measurement, and especially for handheld meter and benchtop analysis users who seek improved performance and functionality while conserving costs while maintaining basic analysis capability, such that projects are expedited easily and efficiently.

Shortened Development Time

The Visual Signal DAQ Express's visualization user interface help you acquire and analyze the noise and vibration signal without any programming, which can minimize the development time of a new project.

Cost-Effectiveness

The ADLINK USB-2405 provides analysis functions similar to known sound and vibration analysis software, which can conserve development resources.

IEPE Input

For applications utilizing sensors such as accelerometers or microphones, the USB-2405 provides an excitation current source.

The excitation current is 2 mA for the IEPE sensors, with DC voltage offset generated because of the excitation current and sensor
impedance. When enabling IEPE current sources, the USB-2405 automatically sets input configuration to AC coupling.

Package Includes: